iSpindle Plotter
Collect and plot fermentation data from an iSpindel hydrometer.
- Developer
- Ian Williams
- License
- MIT
- Package
com.ispindle.plotter- Category
- Science & Education
- Latest version
- 0.5.24 · Oct 8, 2026
- Minimum Android
- Android 7.0
Screenshots
Description
iSpindle Plotter is a self-hosted companion app for the iSpindel — an open-hardware floating hydrometer used by home brewers to track specific gravity through a fermentation. The app runs a small HTTP server on your phone that the iSpindel posts its readings to over your local Wi-Fi network, then stores, charts, and analyses those readings without ever sending your data to a third-party cloud service.
Pairing and configuration:
• Auto-pair flow that joins the iSpindel's configuration access point, sets the phone as the HTTP target (Generic HTTP / selAPI=3), reads the device's existing cubic calibration polynomial off the firmware, and reconnects to your home network — without losing pre-existing fields like the calibration on subsequent saves.
• mDNS-style hostname discovery so the iSpindel can find your phone again after either device's IP changes.
• Pushes the app's own calibration polynomial back to the iSpindel when you re-calibrate.
Calibration:
• Fit cubic / quadratic / linear polynomials from your own sucrose-dilution measurements.
• Imports the iSpindel's pre-installed factory calibration on first pairing.
• Setup guide with a sucrose-step-dilution recipe for 1.000–1.080 SG.
Plotting and analysis:
• Tilt angle, temperature, specific gravity, and battery voltage charts with a 24h / 7d / 30d / All time-window switcher.
• Potential-alcohol secondary axis on the SG chart.
• Robust phase classifier (Lag / Active / Slowing / Conditioning / Stuck / Cold crash) using a modified-Gompertz Levenberg-Marquardt fit (Zwietering et al. 1990), with fallback to an attenuation-prior when the data is too early to constrain the asymptote.
• Predicted final gravity overlaid on the chart with a tapering uncertainty band derived from short-time noise estimation and the calibration polynomial's residual.
• Battery runway estimate: linear discharge fit projecting time-to-cutoff at the current sample rate.
• Trim-before-date-and-time to drop pre-fermentation noise; CSV export via the system file picker.
Privacy:
• No analytics, no telemetry, no third-party network connections.
• Data is held only on your phone and only sent to your iSpindel's local IP for configuration writes.
• The app's HTTP server listens on the phone's local network address only.
Hardware: built and tested with an MTB iSpindel PCB 4.0; should work with any iSpindel firmware that supports the Generic HTTP target.
Pairing and configuration:
• Auto-pair flow that joins the iSpindel's configuration access point, sets the phone as the HTTP target (Generic HTTP / selAPI=3), reads the device's existing cubic calibration polynomial off the firmware, and reconnects to your home network — without losing pre-existing fields like the calibration on subsequent saves.
• mDNS-style hostname discovery so the iSpindel can find your phone again after either device's IP changes.
• Pushes the app's own calibration polynomial back to the iSpindel when you re-calibrate.
Calibration:
• Fit cubic / quadratic / linear polynomials from your own sucrose-dilution measurements.
• Imports the iSpindel's pre-installed factory calibration on first pairing.
• Setup guide with a sucrose-step-dilution recipe for 1.000–1.080 SG.
Plotting and analysis:
• Tilt angle, temperature, specific gravity, and battery voltage charts with a 24h / 7d / 30d / All time-window switcher.
• Potential-alcohol secondary axis on the SG chart.
• Robust phase classifier (Lag / Active / Slowing / Conditioning / Stuck / Cold crash) using a modified-Gompertz Levenberg-Marquardt fit (Zwietering et al. 1990), with fallback to an attenuation-prior when the data is too early to constrain the asymptote.
• Predicted final gravity overlaid on the chart with a tapering uncertainty band derived from short-time noise estimation and the calibration polynomial's residual.
• Battery runway estimate: linear discharge fit projecting time-to-cutoff at the current sample rate.
• Trim-before-date-and-time to drop pre-fermentation noise; CSV export via the system file picker.
Privacy:
• No analytics, no telemetry, no third-party network connections.
• Data is held only on your phone and only sent to your iSpindel's local IP for configuration writes.
• The app's HTTP server listens on the phone's local network address only.
Hardware: built and tested with an MTB iSpindel PCB 4.0; should work with any iSpindel firmware that supports the Generic HTTP target.
All versions
| Version | Released | Minimum Android | Size |
|---|---|---|---|
| 0.5.24 | Oct 8, 2026 | Android 7.0 | 16.3 MB |
| 0.5.23 | Jun 20, 2026 | Android 7.0 | 16.3 MB |
| 0.5.22 | Jun 18, 2026 | Android 7.0 | 16.3 MB |
| 0.5.19 | Jun 16, 2026 | Android 7.0 | 16.3 MB |
| 0.5.17 | Jun 2, 2026 | Android 7.0 | 16.2 MB |
| 0.5.14 | Jun 1, 2026 | Android 7.0 | 16.2 MB |
How to install an older version of an Android app · How to install an APK file on Android
From the developer (GitHub)
APK files published by the developer on GitHub. They are signed by the developer and may not install over the other builds on this page (different signature). Links open github.com.
Similar apps
-
Converter NOW: Unit Converter
A simple, immediate and fast unit converter!
-
Braincup - Brain Training
Train your focus, memory and math skills.
-
microMathematics Plus
Computer algebra system
-
GCompris
Multi-Activity Educational game for children 2 to 10
-
TimeTable
Timetable viewer for VULCAN
-
Open Note Scanner
Scan documents, handwritten notes or arts
- Democracy Droid Watch "Democracy Now The war and peace report"
-
QuickDic
Offline translation dictionary